Home
Teaching
Research and Publications
Contact
Home
Degree
Candidate of Sciences (PhD), Technical Sciences
Education
Education, degrees
2012
Information systems and technologies, Irkutsk State Technical University
Internships
2017
Studying the experience of the Irkutsk Center for Standardization and Metrology in the field of technical regulation and metrology, State Regional Center for Standardization and Metrology in the Irkutsk Region
2018
Training in the skills of first aid for pedagogical workers, Irkutsk National Research Technical University
2018
Organization of the educational process for the main professional programs using the electronic information and educational environment, Irkutsk National Research Technical University
2018
Development of organization standards for the manufacture of engineering products, Research and production corporation “Irkut”
2018
Innovative economy and technological entrepreneurship, Irkutsk National Research Technical University
2019
Modern learning technologies in an educational organization of higher education, Irkutsk National Research Technical University
Languages
Russian
English
Professional Interests
Teaching
Metrology, standardization and certification
Program: Equipment and technology of welding production (Bachelor's degree)
Department: Department of Engineering Technologies and Materials
Program: Equipment and technology of welding production (Bachelor's degree)
Department: Department of Engineering Technologies and Materials
Metrology, Standardization and Certification
Program: Engineering geodesy (Bachelor's degree(5 years))
Department: Department of Mine Surveying and Geodesy
Program: Engineering geodesy (Bachelor's degree(5 years))
Department: Department of Mine Surveying and Geodesy
Metrology, Standardization and Certification
Program: Environmental Protection and Resource Conservation (Bachelor's degree)
Department: Department of Mineral Processing and Environmental Protection named after S.B. Leonov
Program: Environmental Protection and Resource Conservation (Bachelor's degree)
Department: Department of Mineral Processing and Environmental Protection named after S.B. Leonov
Metrology, standardization and certification
Program: Mechatronics and robot systems (Bachelor's degree)
Department: Department of Technology and Equipment for Machine-Building Production
Program: Mechatronics and robot systems (Bachelor's degree)
Department: Department of Technology and Equipment for Machine-Building Production
Metrology, standardization and certification
Program: Operation and maintenance of oil production facilities (Bachelor's degree)
Department: Department of Oil and Gas Engineering
Program: Operation and maintenance of oil production facilities (Bachelor's degree)
Department: Department of Oil and Gas Engineering
Metrology, Standardization and Certification
Program: Safety of technological processes and productions (Bachelor's degree)
Department: Department of Industrial Ecology and Life Safety
Program: Safety of technological processes and productions (Bachelor's degree)
Department: Department of Industrial Ecology and Life Safety
Metrology, standardization and certification
Program: Aircraft and helicopter engineering (Bachelor's degree(5 years))
Department: Department of Aircraft Engineering and Operation of Aviation Equipment
Program: Aircraft and helicopter engineering (Bachelor's degree(5 years))
Department: Department of Aircraft Engineering and Operation of Aviation Equipment
Metrology, Standardization and Certification
Program: Mechanical Engineering Technology (Bachelor's degree)
Department: Department of Technology and Equipment for Machine-Building Production
Program: Mechanical Engineering Technology (Bachelor's degree)
Department: Department of Technology and Equipment for Machine-Building Production
Publications
1. Podashev D.B. Finishing of parts with elastic polymer-abrasive tools. Irkutsk: Publishing House of INRTU, 2018. 246 p.
2. Podashev D.B., Dimov Yu.V. Treatment of parts with polymer-abrasive brushes. Irkutsk: Publishing House of INRTU, 2020. 318 p.
3. Podashev D.B.. Dimov Yu.V. Rounding the sharp edges of machine parts by means of elastic abrasive tools. Russian engineering research. 2013. vol. 33, Vol. 11. P. 632-638.
4. Dimov Yuriy, Dmitriy Podashev. Optimization of Edge Rounding with Elastic Abrasive Tools. International Journal of Engineering and Technology (IJET). Dec 2015-Jan 2016. vol. 7. P. 2001-2007.
5. Podashev D.B., Dimov Yu.V. Edge Forces in Machining by Abrasive Brushes. Russian Engineering Research.2017. vol. 37, no. 2. P. 117-121.
6. Podashev, D.B., Dimov Yu.V. Properties of Elastic Abrasive Wheels .Russian Engineering Research. 2017. vol. 37, no. 7. P. 631-637.
7. Podashev D.B., Dimov Yu.V. Efficient Machining by Elastic Abrasive Wheels. Russian Engineering Research. 2017. vol. 37, no. 7. P. 655-659.
8. Yuriy Dimov and Dmitriy Podashev. Robotic edge machining with abrasive brushes. MATEC: Web of Conferences. 2018. vol. 224. Article number 01014.
9.Yu. Dimov and D. Podashev. Application of industrial robots for parts finishing. IOP: Conferences Series: Materials Science and Engineering. 2018. vol. 463. Article number 022013.
10. Podashev D.B., Dimov Yu.V. Machining forces exerted by an Elastic Abrasive Wheel. Russian Engineering Research. 2018. vol. 38, no. 12. P. 932-937.
11. Podashev D.B., Dimov Yu.V. Rounding sharp edges of machine parts with elastic polymer abrasive wheels. MATEC: Web of Conferences. 2019. vol. 298. Article number 00029.
12. Podashev D.B., Dimov Yu.V. Cutting temperature by polymer-abrasive end brushes for machining planes. Lecture notes in Mechanical Engineering. 2019. Vol. II. pp. 1053-1060.
13.Podashev D.B., Dimov Yu.V. Experimental research of cutting forces at finishing processing of machine components by elastic polymer-abrasive circles. IOP: Conferences Series: Materials Science and Engineering. 2019. vol. 632. Article number 012091.
14.Podashev D.B., Dimov Yu.V. Rounding sharp edges of machine parts with elastic polymer abrasive wheels. IOP: Conferences Series: Materials Science and Engineering. 2020. vol. 709. Article number 022056.
15. Podashev D.B. Study of the possibility to process the edges of the parts on the robot. IOP: Conferences Series: Materials Science and Engineering. 2020. vol. 971. Article number 022028.
16. Podashev D.B., Dimov Yu.V. The wheels for final processing of parts. IOP: Conferences Series: Materials Science and Engineering. 2020. vol. 971. Article number 022029.
17. Podashev D.B. Theory of formation of edge surface roughness finished by radial polymer-abrasive brushes. Materials Science Forum. 2021.1037 MSF. pp. 571-580.
18. Podashev D.B. Control of Deformation of Elastic Polymer-Abrasive Circles at their Wear. Materials Research Proceedings. 2022. vol. 21. pp. 329-334.
2. Podashev D.B., Dimov Yu.V. Treatment of parts with polymer-abrasive brushes. Irkutsk: Publishing House of INRTU, 2020. 318 p.
3. Podashev D.B.. Dimov Yu.V. Rounding the sharp edges of machine parts by means of elastic abrasive tools. Russian engineering research. 2013. vol. 33, Vol. 11. P. 632-638.
4. Dimov Yuriy, Dmitriy Podashev. Optimization of Edge Rounding with Elastic Abrasive Tools. International Journal of Engineering and Technology (IJET). Dec 2015-Jan 2016. vol. 7. P. 2001-2007.
5. Podashev D.B., Dimov Yu.V. Edge Forces in Machining by Abrasive Brushes. Russian Engineering Research.2017. vol. 37, no. 2. P. 117-121.
6. Podashev, D.B., Dimov Yu.V. Properties of Elastic Abrasive Wheels .Russian Engineering Research. 2017. vol. 37, no. 7. P. 631-637.
7. Podashev D.B., Dimov Yu.V. Efficient Machining by Elastic Abrasive Wheels. Russian Engineering Research. 2017. vol. 37, no. 7. P. 655-659.
8. Yuriy Dimov and Dmitriy Podashev. Robotic edge machining with abrasive brushes. MATEC: Web of Conferences. 2018. vol. 224. Article number 01014.
9.Yu. Dimov and D. Podashev. Application of industrial robots for parts finishing. IOP: Conferences Series: Materials Science and Engineering. 2018. vol. 463. Article number 022013.
10. Podashev D.B., Dimov Yu.V. Machining forces exerted by an Elastic Abrasive Wheel. Russian Engineering Research. 2018. vol. 38, no. 12. P. 932-937.
11. Podashev D.B., Dimov Yu.V. Rounding sharp edges of machine parts with elastic polymer abrasive wheels. MATEC: Web of Conferences. 2019. vol. 298. Article number 00029.
12. Podashev D.B., Dimov Yu.V. Cutting temperature by polymer-abrasive end brushes for machining planes. Lecture notes in Mechanical Engineering. 2019. Vol. II. pp. 1053-1060.
13.Podashev D.B., Dimov Yu.V. Experimental research of cutting forces at finishing processing of machine components by elastic polymer-abrasive circles. IOP: Conferences Series: Materials Science and Engineering. 2019. vol. 632. Article number 012091.
14.Podashev D.B., Dimov Yu.V. Rounding sharp edges of machine parts with elastic polymer abrasive wheels. IOP: Conferences Series: Materials Science and Engineering. 2020. vol. 709. Article number 022056.
15. Podashev D.B. Study of the possibility to process the edges of the parts on the robot. IOP: Conferences Series: Materials Science and Engineering. 2020. vol. 971. Article number 022028.
16. Podashev D.B., Dimov Yu.V. The wheels for final processing of parts. IOP: Conferences Series: Materials Science and Engineering. 2020. vol. 971. Article number 022029.
17. Podashev D.B. Theory of formation of edge surface roughness finished by radial polymer-abrasive brushes. Materials Science Forum. 2021.1037 MSF. pp. 571-580.
18. Podashev D.B. Control of Deformation of Elastic Polymer-Abrasive Circles at their Wear. Materials Research Proceedings. 2022. vol. 21. pp. 329-334.
Contact
Phone
Mail
SPIN-RSCI:
3538-1829
Scopus AuthorID:
55961454300