Vladimir Mironenko
Associate Professor:
School of Information Technology and Data Science,
Laboratory of Network Systems and IT Infrastructure (since 2021)
Home
Research and Publications
Contact
Home
Degree
Candidate of Sciences (PhD), Technical Sciences
Education
Education, degrees
2010
Aircraft and helicopter manufacturing, Irkutsk National Research Technical University
2015
Mechanical engineering, Specialization technology, equipment and quality system of welding production, Irkutsk National Research Technical University
2019
Researcher, Lecturer-researcher on course Engineering, Irkutsk National Research Technical University
Continuing education
2016
Business English in the professional activities of teachers of technical specialties of universities (A1-A2 level), advanced training, Faculty of advanced training of the Intersectoral Regional Center for Advanced Studies and Retraining of Specialists of Federal State Budget Educational Institution of Higher Education «Irkutsk National Research Technical University»
2019
University as a regional center for creating innovations, advanced training , Moscow School of Management SKOLKOVO
2021
Computer modeling in aircraft construction, advanced training, Federal State Budgetary Educational Institution of Higher Education
2021
Organization of the educational process for the main professional educational programs using the electronic information and educational environment (EIOS), advanced training, Faculty of advanced training of the Intersectoral Regional Center for Advanced Studies and Retraining of Specialists
2021
Pedagogical and psychological aspects of the organization of inclusive vocational education for persons with disabilities and disabled people, advanced training, Faculty of advanced training of the Intersectoral Regional Center for Advanced Studies and Retraining of Specialists of INRTU
2021
Training of teachers in first aid skills, advanced training, Faculty of advanced training of the Intersectoral Regional Center for Advanced Studies and Retraining of Specialists of INRTU
2021
Fundamentals of management of educational ecosystems, advanced training, Moscow School of Management SKOLKOVO
2021
Practice-oriented approaches in teaching specialized IT-disciplines, Autonomous non-profit organization of higher education
Awards
1. Diploma for the first place in the IV All-Russian Scientific and Practical Conference "Aircraft Engineering and Transport of Siberia" 2014, Irkutsk;
2. Diploma for the first place in the 5th scientific-practical conference "Youth. Projects. Ideas" in the direction "Production preparation", 2015, Irkutsk;
3. Diploma for the second place in the scientific and practical conference "Youth. Projects. Ideas" in the direction "Production preparation", 2017, Irkutsk;
4. Diploma of the 1st degree at the III All-Russian competition of student scientific societies and design bureaus in the nomination "Robotics, modeling and electronics", 2017, Barnaul;
5. Scholarship of the Government of the Russian Federation for students and graduate students studying in educational programs corresponding to the priority areas of modernization and technological development of the Russian economy on the basis of Government Decree No. 1192 dated November 3, 2015 Order for the University on the appointment of scholarships No. 278-O dated April 19, 2017;
6. Scholarship of the Governor of the Irkutsk region, 2017, the city of Irkutsk (ORDER OF THE GOVERNOR OF THE IRKUTSK REGION November 28, 2017 No. 129-r Irkutsk);
7. A grant was won to carry out research work and assess the prospects for commercial use of the results within the framework of the implementation of the innovative project of the UMNIK program "Fund for the Promotion of the Development of Small Forms of Enterprises in the Scientific and Technical Sphere" 2017, the city of Irkutsk (Agreement No. 12557GU / 2017 dated 04/16/2018);
8. 1st place in the competition of scientific and innovative projects "Young Inventor" within the framework of the All-Russian Festival of Science, October 13-14, 2017, Irkutsk;
9. Scholarship of the President of the Russian Federation for students and graduate students studying in educational programs corresponding to the priority areas of modernization and technological development of the Russian economy on the basis of the Decree of the Government of the Russian Federation of August 27, 2016. No. 854 University order No. 280-O dated April 18, 2018;
10. 1st place in the competition of scientific and innovative projects "Young Inventor" within the framework of the All-Russian Festival of Science, October 18-20, 2018, Irkutsk.
11. Personal scholarships from the Public Joint Stock Company Scientific and Production Corporation Irkut (PJSC Irkut Corporation) in 2009 and 2010.
12. 1st place in the regional competition of research projects "Young Inventor" in the nomination "Best Innovative Project" within the framework of the All-Russian Festival of Science, November 5-7, 2020, Irkutsk;
13. In 2019 and 2020, competitions for young teachers of IRNITU were won.
Languages
Russian
English
Professional Interests
Publications
1. FORMATION OF "UNDERCUTS" ON TITANIUM CASE PARTS
Lavrentyeva M.V., Mironenko V.V.
In the collection: IOP Conference Series: Materials Science and Engineering. Ser. "International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2020" 2021. P. 012048.
2. PRESSURE CALCULATION FOR PRELIMINARY FORMATION OF UNDERCUTS PRONE TO DEFECT OF FOLD TYPE
Lavrentyeva M.V., Mironenko V.V.
In the collection: IOP Conference Series: Materials Science and Engineering. Ser. "International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2020" 2021. P. 012049.
3. ON THE ISSUE OF COMPENSATION OF SPRING FITTINGS FOR PARTS MADE BY LONGITUDINAL STRETCHING
Mironenko V.V., Govorkov A.S.
In the collection: IOP Conference Series: Materials Science and Engineering. Ser. "International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2020" 2021. P. 012050.
4. IDENTIFICATION OF PROBLEM PARTS MADE BY LONGITUDINAL STRETCHING WHEN COMPENSATING FOR SPRINGING
Mironenko V.V., Govorkov A.S.
In the collection: IOP Conference Series: Materials Science and Engineering. Ser. "International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2020" 2021. P. 012051.
5. MATHEMATICAL MODEL TO CALCULATE KEY PARAMETERS OF FORMING IRREGULAR LATERAL CUTTINGS ON SHEET ARTICLES TO ELIMINATE SUCH DEFECTS AS "UNDER-FORGING"
Mironenko V.V., Larionova Y.N.
In the collection: IOP Conference Series: Materials Science and Engineering. 2019 International Conference on Innovations in Automotive and Aerospace Engineering, ICI2AE 2019. 2019. P. 012101.
6. CALCULATION OF PROCESS PARAMETERS OF PIECES CONTAINING IRREGULAR LATERAL CUTTINGS, WHICH FORMING LEADS TO SUCH DEFECT AS "CORRUGATION FORMING"
Mironenko V.V., Larionova Y.N.
In the collection: IOP Conference Series: Materials Science and Engineering. 2019 International Conference on Innovations in Automotive and Aerospace Engineering, ICI2AE 2019. 2019. P. 012102.
7. MOVABLE-CLAMP UNDERCUTTING OF SHEET METAL PARTS
Mironenko V.V., Shmakov A.K.
In the collection: Advances in Engineering Research. Proceedings of the International Conference "Aviamechanical engineering and transport" (AVENT 2018). 2018. S. 271-275.
8. REVERSE ENGINEERING AS A WAY TO OPTIMIZE AND DESIGN PARTS PRODUCED BY ELASTIC-MEDIUM DRAWING
Mironenko V., Matsuro E., Ledovskikh C.
In the collection: MATEC Web of Conferences. 2018 International Conference on Modern Trends in Manufacturing Technologies and Equipment, ICMTMTE 2018. 2018. P. 01021.
9. ANALYSIS OF COMBINED HYDROFORMING AND BLANKING OF SHEET ARTICLES
Mironenko V.V., Ledovskikh E.V., Osipov S.A., Ershov A.A.
metallurgist. 2017. V. 60. No. 11-12. pp. 1123-1129. one
10. FORMATION OF SELF-SEALING TUBULAR BLANKS WITH A MOVING EDGE
Mironenko V.V., Osipov S.A., Ershov A.A.
metallurgist. 2017. V. 60. No. 11-12. pp. 1209-1215. 0
11. ACCOUNTING FOR THE TECHNOLOGICAL HISTORYOF THE FORMATION OF A PART IN STRENGTH CALCULATIONS. PART2*
Mironenko V.V., Polyakova O.E., Sechkarenko D.A., Kotov V.V.
metallurgist. 2016. V. 59. No. 11-12. pp. 1015-1019. 2
12. ACCOUNTING FOR THE TECHNOLOGICAL HISTORY OF THE FORMATION OF A PART IN STRENGTH CALCULATIONS
Mironenko V.V., Polyakova O.E., Sechkarenko D.A.
metallurgist. 2016. V. 59. No. 9-10. pp. 871-876. 6
13. CHOOSING AN EFFICIENT METHOD FOR FORMING PARTS BY MEANS OF AN ENGINEERING ANALYSIS PERFORMED WITH THE USE OF A CAE SYSTEM
Cheslavskaya A.A., Mironenko V.V., Kolesnikov A.V., Maksimenko N.V., Kotov V.V.
metallurgist. 2015. V. 58. No. 11-12. pp. 1051-1059. 13
14. ELIMINATING WRINKLING DURING THE FORMING OF PARTS WITH A TALL CONVEX SIDE BY USING WRINKLE SUPPRESSORS
Cheslavskya A.A., Mironenko V.V., Bersenev S.A., Kotov V.V.
metallurgist. 2015. V. 59. No. 5-6. pp. 455-460. 0
15. PNEUMOTHERMAL FORMING OF CORRUGATED STRUCTURES FROM SHEET IN THE SUPERPLASTIC REGIME
Mironenko V.V., Kolesnikov A.V., Maksimenko N.V., Stanislavchik A.S., Kotov V.V.
metallurgist. 2014. V. 57. No. 9-10. pp. 767-773. 0
16. FORMING OF TEE PARTS BY A PROCESS THAT COMBINES DIFFUSION WELDING AND PNEUMOTHERMAL FORMING IN THE SUPERPLASTIC REGIME
Cheslavskaya A.A., Mironenko V.V., Bersenev S.A., Kotov V.V.
metallurgist. 2013. V. 56. No. 11-12. pp. 899-903. 3
17. EFFECT OF THE AVERAGE VELOCITY OF THE FREE PART OF THE SEMIFINISHED PRODUCT ON THE PROCESS OF PNEUMOTHERMAL FORMING IN THE SUPERPLASTIC REGIME
Shmakov A.K., Mironenko V., Kirishina K.K., Stanislavchik A.S., Kotov V.V.
metallurgist. 2013. V. 57. No. 1-2. pp. 8-12. eighteen
18. CONTROLLING THICKNESS VARIATION DURING PNEUMOTHERMAL FORMING IN THE SUPERPLASTIC REGIME
Osipov S.A., Mironenko V.V., Maksimenko N.V., Kotov V.V.
metallurgist. 2013. V. 57. No. 1-2. pp. 85-89. 0
19. USE OF SUPERPLASTIC DEFORMATION AND DIFFUSION WELDING TO FORM A TEE DESIGNED WITH A COMPLEX SET OF INTERNAL STIFFENING ELEMENTS
Shmakov A.K., Mironenko V.V., Kirishina K.K., Kotov V.V.
metallurgist. 2013. V. 57. No. 3-4. pp. 172-175.
Lavrentyeva M.V., Mironenko V.V.
In the collection: IOP Conference Series: Materials Science and Engineering. Ser. "International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2020" 2021. P. 012048.
2. PRESSURE CALCULATION FOR PRELIMINARY FORMATION OF UNDERCUTS PRONE TO DEFECT OF FOLD TYPE
Lavrentyeva M.V., Mironenko V.V.
In the collection: IOP Conference Series: Materials Science and Engineering. Ser. "International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2020" 2021. P. 012049.
3. ON THE ISSUE OF COMPENSATION OF SPRING FITTINGS FOR PARTS MADE BY LONGITUDINAL STRETCHING
Mironenko V.V., Govorkov A.S.
In the collection: IOP Conference Series: Materials Science and Engineering. Ser. "International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2020" 2021. P. 012050.
4. IDENTIFICATION OF PROBLEM PARTS MADE BY LONGITUDINAL STRETCHING WHEN COMPENSATING FOR SPRINGING
Mironenko V.V., Govorkov A.S.
In the collection: IOP Conference Series: Materials Science and Engineering. Ser. "International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2020" 2021. P. 012051.
5. MATHEMATICAL MODEL TO CALCULATE KEY PARAMETERS OF FORMING IRREGULAR LATERAL CUTTINGS ON SHEET ARTICLES TO ELIMINATE SUCH DEFECTS AS "UNDER-FORGING"
Mironenko V.V., Larionova Y.N.
In the collection: IOP Conference Series: Materials Science and Engineering. 2019 International Conference on Innovations in Automotive and Aerospace Engineering, ICI2AE 2019. 2019. P. 012101.
6. CALCULATION OF PROCESS PARAMETERS OF PIECES CONTAINING IRREGULAR LATERAL CUTTINGS, WHICH FORMING LEADS TO SUCH DEFECT AS "CORRUGATION FORMING"
Mironenko V.V., Larionova Y.N.
In the collection: IOP Conference Series: Materials Science and Engineering. 2019 International Conference on Innovations in Automotive and Aerospace Engineering, ICI2AE 2019. 2019. P. 012102.
7. MOVABLE-CLAMP UNDERCUTTING OF SHEET METAL PARTS
Mironenko V.V., Shmakov A.K.
In the collection: Advances in Engineering Research. Proceedings of the International Conference "Aviamechanical engineering and transport" (AVENT 2018). 2018. S. 271-275.
8. REVERSE ENGINEERING AS A WAY TO OPTIMIZE AND DESIGN PARTS PRODUCED BY ELASTIC-MEDIUM DRAWING
Mironenko V., Matsuro E., Ledovskikh C.
In the collection: MATEC Web of Conferences. 2018 International Conference on Modern Trends in Manufacturing Technologies and Equipment, ICMTMTE 2018. 2018. P. 01021.
9. ANALYSIS OF COMBINED HYDROFORMING AND BLANKING OF SHEET ARTICLES
Mironenko V.V., Ledovskikh E.V., Osipov S.A., Ershov A.A.
metallurgist. 2017. V. 60. No. 11-12. pp. 1123-1129. one
10. FORMATION OF SELF-SEALING TUBULAR BLANKS WITH A MOVING EDGE
Mironenko V.V., Osipov S.A., Ershov A.A.
metallurgist. 2017. V. 60. No. 11-12. pp. 1209-1215. 0
11. ACCOUNTING FOR THE TECHNOLOGICAL HISTORYOF THE FORMATION OF A PART IN STRENGTH CALCULATIONS. PART2*
Mironenko V.V., Polyakova O.E., Sechkarenko D.A., Kotov V.V.
metallurgist. 2016. V. 59. No. 11-12. pp. 1015-1019. 2
12. ACCOUNTING FOR THE TECHNOLOGICAL HISTORY OF THE FORMATION OF A PART IN STRENGTH CALCULATIONS
Mironenko V.V., Polyakova O.E., Sechkarenko D.A.
metallurgist. 2016. V. 59. No. 9-10. pp. 871-876. 6
13. CHOOSING AN EFFICIENT METHOD FOR FORMING PARTS BY MEANS OF AN ENGINEERING ANALYSIS PERFORMED WITH THE USE OF A CAE SYSTEM
Cheslavskaya A.A., Mironenko V.V., Kolesnikov A.V., Maksimenko N.V., Kotov V.V.
metallurgist. 2015. V. 58. No. 11-12. pp. 1051-1059. 13
14. ELIMINATING WRINKLING DURING THE FORMING OF PARTS WITH A TALL CONVEX SIDE BY USING WRINKLE SUPPRESSORS
Cheslavskya A.A., Mironenko V.V., Bersenev S.A., Kotov V.V.
metallurgist. 2015. V. 59. No. 5-6. pp. 455-460. 0
15. PNEUMOTHERMAL FORMING OF CORRUGATED STRUCTURES FROM SHEET IN THE SUPERPLASTIC REGIME
Mironenko V.V., Kolesnikov A.V., Maksimenko N.V., Stanislavchik A.S., Kotov V.V.
metallurgist. 2014. V. 57. No. 9-10. pp. 767-773. 0
16. FORMING OF TEE PARTS BY A PROCESS THAT COMBINES DIFFUSION WELDING AND PNEUMOTHERMAL FORMING IN THE SUPERPLASTIC REGIME
Cheslavskaya A.A., Mironenko V.V., Bersenev S.A., Kotov V.V.
metallurgist. 2013. V. 56. No. 11-12. pp. 899-903. 3
17. EFFECT OF THE AVERAGE VELOCITY OF THE FREE PART OF THE SEMIFINISHED PRODUCT ON THE PROCESS OF PNEUMOTHERMAL FORMING IN THE SUPERPLASTIC REGIME
Shmakov A.K., Mironenko V., Kirishina K.K., Stanislavchik A.S., Kotov V.V.
metallurgist. 2013. V. 57. No. 1-2. pp. 8-12. eighteen
18. CONTROLLING THICKNESS VARIATION DURING PNEUMOTHERMAL FORMING IN THE SUPERPLASTIC REGIME
Osipov S.A., Mironenko V.V., Maksimenko N.V., Kotov V.V.
metallurgist. 2013. V. 57. No. 1-2. pp. 85-89. 0
19. USE OF SUPERPLASTIC DEFORMATION AND DIFFUSION WELDING TO FORM A TEE DESIGNED WITH A COMPLEX SET OF INTERNAL STIFFENING ELEMENTS
Shmakov A.K., Mironenko V.V., Kirishina K.K., Kotov V.V.
metallurgist. 2013. V. 57. No. 3-4. pp. 172-175.
Contact
Phone
SPIN-RSCI:
9031-4824
ORCID:
0000-0002-0580-760X
ResearcherID:
E-1904-2018
Scopus AuthorID:
55624584000